NEW TRIPLE CLUTCH CABLES
Heavy duty clutch cables for Triples, from Venhill engineering, 9.5mm robust T4 outer with heavy duty liner and 2.5mm inner cable. Reduces outer cable flex transmitting more energy into operating the clutch. £16.83 + VAT.NEW SPEEDO/TACHO CABLES
We have decided to stock Venhill engineering speedo and tacho cables exclusively, top UK quality, metal-armoured at drive end, £11.95 tacho, £13.95 speedo + VAT.
Triple rocker lids REVISED DESIGN
Machined from billet aluminium to fit all Triples. Much stronger than standard, horizontal finning. Please note they are not handed, fits both inlet and exhaust. £34.95 + VAT.
Order part no 70-6563A.
X75 Hurricane fork yokes
After a 2 year development, X75 fork yokes have been remade in LM25 heat-treated alloy. Stronger than the original but authentic right down to the casting numbers underneath. Please note stem is not supplied. £270+ VAT a set. Order part nos 97-4183/9.
STOP PRESS AP Racing Classic range re-introduced - see BRAKES section in the catalogue
Arrow steel conrods for Triples
After a long wait we now have UK made Arrow steel conrods for Triples. Super strong they are the best you can get. Weight-matched in sets of 3. £495 + VAT a set. SUPPORT BRITISH INDUSTRY. Order part no 70-9740A. Back in stock.
Carb velocity stack - works replica ..... £25.00
Available in 27mm or 30mm, overall length 80mm, these have the same shape as the Works racing items, but with the advantage that they can be slipped over the carb inlet rather than having to have it machined and bonded on. Secured by 3 stainless steel grubscrews. Please note that on a standard T150 these will not fit between the centre carb and frame downtube.
T150T/R3 "Ray Gun" silencers
We have a limited supply of RayGun silencers, good welding, Campbells style but no stamp on the outside face. 1¼" inlet diameter. £99 + VAT each (pairs only). Order part nos 70-9036/7.NEW STOCK ARRIVING JUNE, ORDERS BEING TAKEN.
T160 starter motor cover
THEY'RE BACK! At last we have our stainless steel starter motor covers for T160 back in stock. At the moment they are only available unpolished, and really do need polishing before fitting. £41.95 + VAT. Order part no 83-5529.
X75 Hurricane breather hose
Newly manufactured right angle rubbers for X75 breather hose. We don't have the joining pipe at the moment. £7.95 EACH. Order part no 60-3558. BACK IN STOCK.
T160 sprocket conversion
CNC-machined alloy carrier allows fitment of Triumph 5-hole sprocket in 47, 50 and 53 teeth sizes. 47T recommended for more relaxed cruising. £60 + sprocket (£20).
X75 Hurricane mug
As shown above, £6.50.
T160 pushrod cover tubes
Machined from billet aluminium for T160 but will retro-fit all triples. Will not rust and can be polished to look closer to the original. £14.95 + VAT. Order part no 71-4378A.
T140 CNC-machined rocker lids
Superb replacement T140 rocker lid. Machined from billet aluminium, with Triumph logo profile and engraving. £32.95 + VAT . Order part number 71-3671A.
Rigid handlebar mount kit
Machined from billet aluminium to fit all Triumphs. Replaces the standard rubber mounts. Set of 4. £9.95 + VAT. Order part no 97-1616.
Improved clutch pullrod bearing
Designed specifically for side thrust applications, this bearing will prove more durable than the standard item. Please note that due to a massive price increase this product is temporarily unavailable. Order part no 57-3717A.
STOP PRESS
We have now taken over PSP's range of hydraulic clutch conversions for T140 and CNC-machined pushrod cover tubes. Hydraulic clutch cylinder only, £102.12 +VAT or
complete with Magura handlebar master cylinder and braided hose, £170.20 + VAT.High Flow, washable K&N air filter elements for T150/R3 and T160.
£34 + VAT for T150/R3 and 
£32 + VAT for T160. 
Triple sump plate c/w magnetic drainplug
Fits all triples, allows oil to be drained from the sump without removing the sump plate (and exhaust system on T160!) Machined from billet aluminium, with steel magnetic drainplug.
Please note this should not be seen as an excuse not to remove and clean the sump filter gauze at the recommended intervals! £28.95 + VAT (includes drainplug). Order part no 70-6580A.
EBC HH brake pads
Latest 'Double H' pads from EBC. Offer much-improved performance although they may slightly increase disc wear.
Customer quote "It changed my single front disc from barely adequate to being able to lock the front wheel". As these are so good it is recommended
not to fit them in the rear only without fitting them in the front as well, as brake balance will be severely affected. £15.95 + VAT. Order part no 99-2769HH
P&M racing valve sets
Top quality, hard-wearing valves, flow-efficient head profile, complete with hardened top caps to avoid stem wear. (Don't be tempted by "Black Diamond" valves on Ebay, they are not the same thing.)Available for Triples (£105 + VAT) and Twins (£70 + VAT).
Please note that on Triples they must be used with short valve adjusters.
Banjo bolt brake light switch
Banjo bolt for Goodridge brake lines, incorporating a hydraulic brake light switch. 3/8 UNF thread. Replaces single length banjo bolt. £11.99 + VAT
Replica grey face speedo and tacho
Replica Smiths grey face speedo and tacho will fit any machine (with 1.25:1 speedo gearbox) with mounting studs, complete with illumination bulb holder. Speedo £66.99, Tacho £62.37 + VAT.
Replica black face speedo and tacho
Replica Smiths black face speedo and tacho will fit any machine (with 1.25:1 speedo gearbox) with mounting studs complete with illumination bulb holder. Speedo £66.99, Tacho £62.37 + VAT.
Replacement speedo and tacho
Replacement speedo and tacho will fit any machine 1968 onwards (with 1.25:1 speedo gearbox). Available with or without mounting studs. Speedo £66.99, Tacho £62.37 + VAT.
KPH speedo also available. Illumination bulb holder £2.95 + VAT
Alloy clutch sprocket
Machined from billet aluminium, hard anodised. For Pre-unit (57-1549A), Duplex unit twins (57-1570A) and Triplex T140 (57-4640A). Approximately 1/3 the weight of the standard item and takes standard plates. £63.79 + VAT.
Use with our alloy clutch friction plates (£5.95 each) to save even more weight, around 3lbs in total.
Also available for Trident T150 (57-4225A) £69.95 + VAT.
T120/T140 7-plate clutch conversion
This conversion consists of 7 new plates with smaller friction area plus one new plain plate. Compared with standard it reduces
problems of sticking, slipping, swelling, dragging and heavy operation provided the other components are in good condition.
£51.02 + VAT.Use with existing 6 plain plate or: We also have excellent quality plain plates at £18.00 per set of 6.
57-4590A T120/T140 CNC clutch pressure plate
Replacement for the standard pressed steel plate, CNC-machined from high strength alloy, lighter, stronger. Maximum clutch lockup, fast consistent release, doesn't warp. Our own design with steel thread for adjuster pin. Suits any 3-spring clutch. £22.50 + VAT.
Ultimate Triumph clutch
This represents the pinnacle of development of the Triumph 3-spring clutch. Hard-anodised billet alloy clutch drum, alloy friction plates, top quality plain steel plates,
billet pressure plate for positive lock up and instant release, new springs. Available in T120 (Duplex) or T140 (Triplex) condition. Weight saving over standard approx 1.5Kg (3lbs) £142.50. Add £15 to upgrade to 7-plate clutch conversion.
High output alternator kit
LUCAS 180W alternator (NOT made in China) plus PODtronics solid state regulator box. Develops 70% more power than the standard alternator at only 2400rpm.
Now you can run with a Halogen headlight and electronic ignition without worrying about a flat battery. £146 + VAT.
Tank reflectors
We now have a quality range of bodywork parts for T100/T120. The under tank reflector and housing comes in two forms,
the one on the left (early type) is £16 for the housing and £12 for the reflector. The later type is £17 for the housing and £5.78 for the reflector.
We also have the LH sidepanel/toolbox made using the original tooling for £33, unpainted.
Also available are two versions of the rear number plate one with single hole top mounting,
and one with 2 hole top mounting. Both are painted black. All prices are plus VAT.
SUSPENSION BONANZA! - drag your bike's handling into the 21st Century!
Progressive fork springs
Now available for 1945-59 Triumphs and T140 and T150/T160 (and BSA Oil in Frame models) PLUS Hinckley Bonneville and Rocket III (go to New Bonneville) these USA made springs give a smoother ride during normal conditions but offer higher compression rates under more demanding conditions. Other benefits include improved cornering stabilty and reduced dive under braking. £51.02 + VAT a pair.We now also have our own design progressive springs for 1963-70 (external spring) forks at £21.28 + VAT a pair
Damper rod seal kit
Ths damper rod kit consists of a set of two damper rod piston rings manufactured of a Phenolic material (fibre resin). They provide much smoother action compared with the standard O-ring. Suits all alloy fork models. £8.50 + VAT a pair.Progressive suspension units
Gas units from Progressive in the USA. Velocity-sensitive valving automatically adjusts for optimum ride and handling. Offset bottom mount for clearance. Traditional black with chrome springs. £178.68 + VAT a pair. PLUS alloy bodied units and springs for Hinckley Bonneville and the awesome 440 units for Hinckley Rocket3.
Hydraulic bike lift.
Bike lift, with foot-operated hydraulic action. Raises the machine safely over 16" off the ground, ideal for working on forks, swinging arm etc. Safe up to 500kg. £84.68 + VAT.
We have these in stock, or can arrange UK delivery for £10 + VAT.
Hydraulic bike bench.
Bike bench, with foot-operated hydraulic action. Raises the machine safely over 27" off the ground, so you can work on your machine in comfort. Wheels enable easy mobility. Safe up to 400kg. £255 + VAT.
We do not keep stock of these but can arrange UK delivery for £66 + VAT or less depending on location.T140V airbox covers
Newly manufactured T140V airbox covers in black ABS. £12.95 each + VAT.
Boyer-Bransden Micro-Power ignition
A new version of the Micro-Digital ignition designed specifically for use with high power miniature coils. Although it still fires all cylinders together it overcomes the problem
of high power consumption by supplying a very powerful, accurately timed spark.
Particularly good where space and weight are at a premium. For Triples one dual and one single coil are supplied, for Twins one dual
coil is supplied. HT lead and plugs caps are also included. Very cost-effective if old coils are due for replacement anyway.
Price of Triple ignition is £146.92, for Twins £112.26. All prices plus VAT.
Inspection cap tool
Are you fed up of wrecking engine inspection caps by using a normal screwdriver?
This amazing tool will remove and replace the most stubborn cap without damage. Simply use a 5/8"AF or 16mm spanner on the hexagon body. Will pay for itself many times over.£4.95 + VAT.
750cc Twin barrel and pistons
New barrel and standard piston assemblies SPECIAL PRICE £191.49 + VAT.
750cc Low Compression pistons
New 7.4:1 compression pistons for use with unleaded fuel. Ideally use with cast iron valve guides and non chrome stem valves.
Then you can happily run on any crap that the fuel companies choose to throw at us. £101.20 a pair + VAT.
Bike Covers
No matter how hard you try, bikes in storage are bound to get dusty. Using an old blanket can be an invitation for damp to cling to the machine, eventually leading to corrosion.
I have seen bikes which have been stored for years without correct protection and they can get into an unbelievable state. We now offer two levels of protection.
The OXFORD Dormex breathable dust cover allows air to circulate and has an elasticated bottom for £21.28 + VAT.
For longer term or winter storage the VacBag is a sealable plastic bag that you simply wheel your bike into, extract air using a vacuum cleaner,
and seal the neck with the strap supplied. This provides a dust-free, rust-free environment, just wheel the bike out in exactly the condition as when you put it away. £29.75 + VAT.
PODtronics solid state regulator box
Performs the function of both the rectifer and the zener diode in a single
compact solid state unit.They can be located anywhere on the machine in free air, not necessarily in the airflow.
Also allows conversion of alternator from 6V to 12V.Single phase £36.55 + VAT (dimensions 65 x 65 x 30mm), 3 phase £39.96 + VAT (dimensions 75 x 65 x 28mm).
Boyer Bransden versions also available at £51.03 and £54.68 + VAT.
Sigma trip computer
Originally designed for bicycles, these are now capable of measuring up to 183MPH, so are suitable for use on motorcycles.
Features include:
- Speed readout
- Clock
- Trip meter
- Odometer
- Riding time
- Max speed
- Average speed
- Auto stop/start
- Fits spoked or alloy wheels
- Easy handlebar mounting
Dural Oil Filter Cap
Oil tank magnetic drainplug
